The Default Port Forwarding Guide for the Billion Bipac-5112S
To setup port forwarding on this router your computer needs to have a static ip address.
Try our free PF Setup Static IP Address Program which will setup a static ip address for your computer.
Or you can take a look at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.
Do not skip this step!
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser. If you do not know your routers internal IP address please read our How To Find Your Routers IP Address guide.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your router. By default the IP address should be set to 192.168.1.254.
You should see a box prompting you for your username and password. Enter your username and password now. By default the username is admin, and the password is password. Click the Ok button to log in to your router.
Click the Advanced Setup link near the top of the page.
Click the NAT link near the top of the page.
Click the Virtual Server link near the bottom of the page.
Select an empty rule from the Rule Index drop down box.
Enter the name of the program into the Application box. It doesn’t really matter what you put into this box, but something that will remind you why these ports are being forwarded would be a good idea.
If you are forwarding a single port, enter that port number into the Start Port Number and the End Port Number boxes. If you are forwarding a range of ports, enter the lowest number of that range into the Start Port Number box. Then enter the highest number of that range into the End Port Number box.
Enter the ip address to forward these ports to into the Local IP Address box. If you are forwarding ports so you can run a program on your computer, you should enter your computer’s ip address into that box.
When you are finished, click the Save button.
And that is it! You are done!
To test if your port has been properly forwarded, you can use our Port Checker tool.
Didn’t find the screenshot you were looking for? Check our our giant collection of router screenshots.tutorial